Sunday, December 20, 2020

Heater / AC Control Panel Plate - Mazda (NA01-61-C04A) replacement

 plenty of how to videos on google so just adding couple of thoughts 


amazon $32 w/ free shipping

mine was in bad shape after 29 years.  




the control knobs are held in by small phillips head screws.  i had to remove my after market radio to get at the lower two screws.  i used craftsman ph 0 x 40mm screwdriver. think about where the screw would wind up if it drops.  recommend using a towel, 



use old tooth brush to clean out the grooves


there is a clear plastic piece that comes out when you remove the old decal for fan settings.  i used goof off to clean it up.  it appears to be a light diffuser.  







'looking good billy ray'





Saturday, November 28, 2020

2011 Tomos ST Moped for sale by owner [SOLD]

SOLD


just serviced by local motorcycle shop (Kontiki in Pacific Beach CA)

carburetor, fuel filter, spark plug, oil change

low miles (~730)

30mph/100 mpg

registered w/ CA DMV

local pickup only

$700 firm








Saturday, April 4, 2020

Miata NA radiator replacement

videos available on youtube so just highlighting a few specifics that would have helped me

i got a standard one from o'reilly's locally as did not want to wait for amazon or ebay.   $117.  probably could have saved $50 if bought on line.

original radiator lasted 16 years (165K miles), replacement 13 years. (70K miles)

i was able to re use the fans, grommets and stop bolts.  came with the 8 metal clips that thread the bolts for the two fans.  i did need to replace the bolts as they were rusted (metric size 6 20mm) from hardware store.

removal and replacement was straight forward and can be done alone.  was able to access all the bolts to remove the plastic bottom guard shield and radiator by just jacking up the driver side.  i did wind up having to jack up the passenger side when reinstalling the plastic guard as turned out a couple of bolts were missing.











removing connector on passenger side fan.  insert small flat head screw driver underneath tab  in center to remove











i was able to reuse.  needed to sand the rust off in order to fit the bolt thru the opening of the new radiator










you need to re use the grommets.  remove the center metal piece that allows you to squeeze them in and out


Friday, January 17, 2020

replacement sink for FOREMOST 14-005

FOREMOST 14-005

Avanity Model #CUM18WT

https://www.homedepot.com/p/Avanity-Undermount-Bathroom-Sink-in-White-CUM18WT/202831195

Home Depot for $50

Undermount sink

16 (side to side) x 13 (front to back) oval sink opening looking straight down

drain in same place.

this was only sink I found where i would not have to move the existing bolts.  did not want to mess with drilling into marble.




Thursday, December 26, 2019

Samsung refrigerator lights blinking (Model RB197..)

After power outage, fridge temp sensor was blinking.  Initially the top horizontal led (#1) then after about 10 minutes the lower left led (#5).

I do not have a ice maker.

short version

pressed the power freeze/power cool buttons simultaneously for up to 30 seconds and the panel reset



long version

several different button push combo recommendations on line.  i tried then all with no luck, including the one (above) that eventually worked

unplugged the fridge for at least 5 minutes. no luck with button combo

tried samsung chat.  complete waste of time.  obvious the person 'assisting' me had multiple chats going.  took several minutes to respond to each text, repeated questions and generally did not appear to comprehend my problem.  overall wasted 35 minutes as ended with them saying i needed to have a tech visit.

after the chat i found the above diagram that identified the error codes 1 - ice maker sensor and 5 - I/M function error, both related to ice maker.  Since I don't have an ice maker, opened the freezer and made sure the left hand ice drawer was properly set/level.

unplugged the fridge for 10 minutes.

this time the power freeze/power cool simultaneous push combo worked. 

Tuesday, December 10, 2019

Miata NA (1991) Headlight stuck half way


Engine stalled while headlights were on.  After restarting engine, driver side  headlight  was half way and would not retract if headlights were turned off or internal headlight button pushed.

this video was helpful.  

https://www.youtube.com/watch?v=V6VomjAgitU

what i did (short version)

- removed the 30 amp fuse from the fuse box in the engine compartment (circled in blue)
- disconnect the connector to the headlight motor (circled in red)
- manually cranked to the closed position
- reconnected connector
- replaced fuse
- started car



Observations

when manually turning the headlight motor to full open position (with fuse in) the resistance varied.  Some sections it was stiff and others required very little effort to turn. Have not tried the passenger side to compare

Update: The headlight got stuck several more times over the next couple of days.  First time I manually cranked open (with fuse in place).  Then next two times rather then repeat the above, I wound up starting to drive in that position and it eventually opened to the full position.  One time after about 5 minutes, another time after 10.  Is now working normally.


long version

turned the manual headlight crank down and got resistance so had power to the motor
[designed to allow you to crank open so expect you should not get resistance in that direction]
removed fuse (fuse box in engine compartment - circled in blue) 
manually raised headlight all the way open
replaced fuse - headlight reverted to partially open position (not exactly same spot)
remove fuse, manually lower headlight all the way
replace fuse - headlight reverted to partially open (not exactly same spot)
remove fuse
disconnect motor connector.  
- manually raise headlight to get better access to connector
- push the tab on the connector inwards
- struggle to disconnect
reconnect connector
manually lower headlight
replace fuse - no headlight motion (different than before when it would raise partially up)
start car
turn on headlights - both fully up
turn off headlights - both fully down






Saturday, March 2, 2019

Miata NA (1991) Hood release cable replacement

Very straightforward

great video here titled Miata MX5 Hood Release Cable Replacement - MIATA STREET

https://www.youtube.com/watch?v=hVvwL_CCvdM


bought a new cable from the dealer for $40.  Think I could have bought on line for $20

Fortunately my cable failed with the hood open.  I had been having trouble pushing the handle back in for some time before it finally would not go all the way back in so the hood would not close all the way.  Crappy design as the actual cable was fine.

advice

I attached some string to the end of the cable before pulling it through the firewall.  This made it simple to pull the new cable back through.