General
Very straight forward.
Couple of notes
- On the rear brakes, the you DO NOT compress the piston with a C Clamp. Use an allen wrench to turn a screw that compresses the piston
- you do not need to remove the 'key" when unwinding using the 4mm allen wrench. you should be able to see the piston retract when turning.
- I had to use a hammer to gently tap the rotors as I rotated then to break them free.
- I released the parking brake
- I used a lift as couple of the bolts were on tight and extra room made access much easier to break free.
lots of good info on miata net and you tube
front
https://www.youtube.com/watch?v=4VTpB_PEcQQ
rear
https://www.youtube.com/watch?v=1PxL23FHdTE
